[Howto]: the simple geomagmasters swirl

[Howto]: the simple geomagmasters swirl

Postby Eric » Mon Nov 30, 2020 3:35 pm

Hi all!

I was still a beginner when I tried to replicate the geomagmasters swirl and I have to admit I struggled a bit with the only help of photos of the final result.
So for those who are in the same situation as I was and would like to build this beautiful and satisfying structure, here is my own version of some construction steps at different angles that might help.
Thanks again to geomagmasters for this beautiful shape.

20200617_163935.jpg
The lower part seen from above

20200617_164139.jpg
Side view after adding squares all around the edge of the lower part

20200617_164154.jpg
Front view without the swirl
Last edited by Eric on Mon Jan 11, 2021 8:58 pm, edited 2 times in total.
User avatar
Eric
 
Posts: 192
Joined: Fri Nov 13, 2020 11:19 am
Location: France
Real name: Eric

Re: My geomagmasters swirl howto

Postby Eric » Mon Nov 30, 2020 3:39 pm

20200617_165152.jpg
just add the swirl rods one by one

20200617_165336.jpg
Nice with glowing rods


That's all Folks!


Please feel free to comment so I know if anyone is still there
User avatar
Eric
 
Posts: 192
Joined: Fri Nov 13, 2020 11:19 am
Location: France
Real name: Eric


Return to Construction challenges, instructions and projects

Who is online

Users browsing this forum: No registered users and 1 guest

cron